Zhixiang Hardware Spring specializes in producing various micro springs. Through continuous investment in the research and development of micro springs, the company can now stably produce micro springs with a diameter of 0.01mm and an outer diameter of 0.06 or more. It has the advantages of high spring accuracy and small size, and can be used in very small installation positions. We recommend that the maximum deformation of the micro spring during use should not exceed 40% of the deformation (it is generally not recommended to continuously apply force to the micro spring until it reaches the compression height, as prolonged operation can affect the length and fatigue of the micro spring).

Zhixiang Hardware specializes in producing various micro screws. Through continuous investment in the research and development of micro screws, the company is able to stably produce micro screws with a diameter of m0.3 or above. It has the advantages of high precision and small size, and can be used in microelectronic instruments.

A compression spring is a spiral spring that bears compressive force. The material used for it is mostly circular in cross-section, but it can also be made of rectangular or multi strand steel coils. The spring is generally of equal pitch, and the shape of the compression spring includes cylindrical, conical, convex and concave shapes, as well as a small amount of non-circular shapes. There is a certain gap between the coils of the compression spring. When subjected to external loads, the spring shrinks and deforms, storing deformation energy.

Stretch the springs tightly together to resist tension. In the unloaded state, these coils are usually tightly closed, and the closure of the tension spring includes hooks, small holes, or other geometric interfaces for fixing to the connected components. They often provide rebound force for components that are stretched in the starting position.

Medical springs are various medical compression springs, medical tension springs, and medical torsion springs used in medical devices. They are used in some equipment that requires elasticity. Due to the high material requirements of the medical environment, our company specially uses high-precision environmentally friendly spring steel wire imported from Europe and America to meet the requirements of customers for medical device springs. Zhixiang Spring specializes in producing various medical springs.

The end of the torsion spring is fixed to other components, and when the other components rotate around the center of the spring, the spring pulls them back to their initial position. Although this spring is called a torsion spring, it is constrained by bending stress rather than torsion stress. Twisting springs can store and release angular energy or statically fix a device by rotating the force arm around the central axis of the spring body.

This process utilizes precise waveform control technology to generate large elastic force in small spaces for the spring. Compared with ordinary springs, it greatly reduces the length of the spring under the same elastic force, which is very suitable for situations where the required area is large and the height is low.

Springs are widely used in switches, including daily lighting switches, mechanical equipment switches, and modern switch designs and manufacturing. Switch springs are widely used in switches and various electronic component products.